How To Measure Hollow To Hem?

How to Measure Hollow to Hem?,

Key Takeaways:

  • Hollow-to-hem measurement is crucial in dressmaking, especially for tailoring a perfect fit. It measures the distance from the hollow of the neck (base of the neck) to the hem of the dress.
  • To get accurate measurements, you need the right tools, such as a measuring tape and a dress size chart, and calculate the hollow-to-hem length by subtracting the seam allowance from the desired length.
  • It is essential to consider factors such as dress length for different occasions, tailoring for specific body types such as plus size and maternity dresses, and avoiding common mistakes, like confusing hollow-to-hem and hollow-to-floor measurements. Understanding search intent and using NLP strategies can help optimize dress measurement articles.

Understanding Hollow-to-Hem Measurements

Understanding Hollow To Hem Measurements - How To Measure Hollow To Hem?,

Photo Credits: by Jose Brown

Hollow-to-hem measurement is essential when determining the perfect dress fit. It measures the length from the hollow between the collarbones and the dress’s hem.

To understand the measurements better, refer to the table below, which outlines standard dress sizes and their corresponding hollow-to-hem measurements:

Dress Size Hollow to Hem Measurement (inches)
2 58
4 58
6 59
8 59
10 60
12 60
14 61
16 61
18 62
20 62

It’s important to note that the measurements may vary depending on the manufacturer and design. Always measure accurately to get the correct dress length.

One common confusion is understanding the difference between hollow to hem and height. While hollow to hem measures the length from the collarbone hollow to the dress’s hem, the height measures the distance from the top of the head to the feet.

A fact: According to Fashion Incubator, dresses with a hollow to-hem measurement are often used for formal and bridal wear, while the height usually measures everyday wear.

Tools Needed for Measuring Hollow to Hem

Tools Needed For Measuring Hollow To Hem - How To Measure Hollow To Hem?,

Photo Credits: by Terry Scott

To measure the Hollow to Hem, you need to have specific measuring tools appropriate for dresses. Here are the steps you can follow:

  1. Position the measuring tape at the hollow of your neck, just above your collarbone.
  2. Extend the tape down to the hem of your dress. To get an accurate measurement, ensure that the video follows the contour of your body.
  3. Read the measurement on the tape. This measurement is the Hollow to Hem measurement.
  4. Use a dress size chart or dress length chart to determine the dress length you need based on your Hollow to Hem measurement.
  5. To make alterations for dresses, use a seam allowance. A seam allowance is an excess fabric left between the edge of the material and the stitching line.
  6. Hem the dress to the desired length by hand or using a sewing machine.

When measuring for a perfect fit, having the right estimating tools for dresses is important. To ensure an ideal fit, measuring for alterations and tailoring for dress length are crucial. It’s also important to know the basics of seam allowances for dresses.

Hemming techniques are helpful when it comes to tailoring basics for dresses. Interestingly, did you know that dress sizes vary among brands? (source:

Steps for Measuring Hollow to Hem

Steps For Measuring Hollow To Hem - How To Measure Hollow To Hem?,

Photo Credits: by John King

Measure dress length accurately by following hollow-to-hem steps. Get accurate measurements with long-tail keyword research. It’ll help you get the right size and length. Calculate open-to-hem length considering occasion, height, and dress type.

This covers dress lengths for occasions like formal events, weddings, etc. Also, for women of different heights. Find the ideal dress length.

Step 1: Getting Accurate Measurements

Accurately measuring hollow to hem is crucial to ensure your dress fits you perfectly. This step involves taking careful and precise measurements of specific body parts using the proper tools and techniques. A simple mistake could lead to an ill-fitting dress.

To get accurate measurements, follow these five steps:

  1. Take off any bulky clothing, including shoes.
  2. Stand upright with your feet shoulder-width apart.
  3. Use a tape measure to find the hollow point, typically two inches above your collarbone, where the top of the dress will sit.
  4. While standing up straight, use the tape measure to determine your desired hemline measurement.
  5. Record both measurements in inches or centimeters for conversion later.

Using long-tail keyword research and strategy is essential when targeting search engine optimization for specific niches like dress measurement conversion. Utilizing long-tail keyword generators and examples can help you discover more targeted keywords relevant to this topic.

Remember that each designer may have different sizing standards; therefore, it’s essential to measure correctly and double-check sizing charts before placing an order.

Fun Fact: According to Google Trends data analysis report on fashion in 2021, “long prom dresses” is one of the highest-ranking search terms around prom attire compared with “short prom dresses.”

Measuring dress length vs. height: we all know they’re very different things.

Step 2: Calculating the Hollow to Hem Length

Calculating the Length from Hollow to Hem

To calculate the length from hollow to hem accurately, take measurements carefully of the distance from the base of your neck (or where you want the dress to start) to the hemline.

  1. Identify the hollow:
    Ask the person being measured to stand straight up with their heels together and measure from where their shoulder blades come together, known as their “hollow,” down to where they’d like their dress to end.
  2. Use a flexible measuring tape:
    Use a soft, flexible measuring tape for measurements since it quickly moves around curves and angles on your body’s natural contours.
  3. Make sure it’s a straight line:
    To get an accurate measurement wrap around your figure in a straight line – don’t make any dips or curves that follow your spine or waist when covering, which can cause inaccuracies.
  4. Record Measurements:
    Ensure you note all necessary measurements without skipping any detail before proceeding further.
  5. Calculating Length:
    Subtracting this number (the hollow-to-floor measurement) from the full-length dress measurement shows how much of the dress is made up by train or skirt at full-length – this usually measures about five inches over knee height. Subtract 5 inches (13 cm) for different dress lengths, such as cocktail dresses, tea-length gowns, or ballgowns.
  6. Adjusting Dress Length:
    It is essential to adjust dress length based on specific events such as formal occasions or wedding ceremonies, alter designs according to required styles for petite or tall figures, and relative measure of dress length vs. height.

Pro Tip: Have someone else take the measurements for more precision while standing upright in comfortable footwear and undergarments similar in type to those worn with the gown on the event day.

Before you start measuring, make sure to put on your tailoring hat and have your hemming needle at the ready!

Tips for Measuring Hollow to Hem

Tips For Measuring Hollow To Hem - How To Measure Hollow To Hem?,

Photo Credits: by Jonathan Thomas

Tips for Measuring Hollow to Hem

Hollow to hem is the length measurement from the neck’s hollow to the dress’s hem. To get a precise measurement, follow these easy steps:

  1. Position the measuring tape at the base of the neck, at the hollow between the collarbones.
  2. Place the tape straight down to the hem of the dress.
  3. Ensure the tape is parallel to the ground and not hugging the bust.
  4. Make sure to measure while wearing the shoes worn with the dress.
  5. When taking the measurement, stand up straight, with your arms relaxed.

Tailoring for dress length is often done by hemming a dress by hand. However, it is crucial to measure the dress length correctly before hemming. A dress measurement guide will ensure a perfect fit. Measuring a dress is easy; these tips allow you to get the ideal size.

Don’t miss out on the perfect dress because of an incorrect measurement. Use these tips to correctly measure the hollow to hem and ensure the ideal fit. Always remember to stand up straight, relax your arms, and wear the shoes you plan to wear with the dress. Get ready to show off your new dress with confidence!

Factors to Consider When Measuring Hollow to Hem

Factors To Consider When Measuring Hollow To Hem - How To Measure Hollow To Hem?,

Photo Credits: by Jason Rodriguez

Several factors require attention when measuring hollow to hem to ensure accurate measurements. These include the type of fabric, the measurement tool, and the posture of the individual being measured.

To take proper measurements for dress measurement for plus size or height for maternity dresses, follow the below four steps without missing any details.

  1. Begin by positioning the individual upright, standing in a relaxed but straight form, with their arms at their sides.
  2. Place the measuring tape at the hollow of the individual’s neck and let it drop to the floor. Ensure that the video touches the floor precisely and follows the curve of the individual’s body.
  3. Record the tape measure length from the hollow of the individual’s neck to the floor. This measurement is the hollow-to-hem measurement.
  4. Verify the measurement accuracy by comparing it with previously taken measurements. Repeat the process if the measures do not match.

It is worth noting that for individuals with prominent buttocks or busts, measuring at the center of the back is advisable, depending on the dress style. For historical purposes, hollow-to-hem measurements have been used since the early 1900s to provide proper guidance for clothing.

Common Mistakes to Avoid When Measuring Hollow to Hem

Common Mistakes To Avoid When Measuring Hollow To Hem - How To Measure Hollow To Hem?,

Photo Credits: by John Martin

Measuring the hollow to hem is crucial when it comes to dress alterations. To ensure accuracy, it’s essential to avoid common mistakes in the measurement process.

Common Mistakes to Avoid When Measuring Hollow to Hem:

  • Measuring while wearing the wrong undergarments or shoes
  • Not standing up straight while taking the measurement
  • Measuring the bad body part or section of the dress
  • Measuring too tightly or loosely
  • Not using a proper measuring tape
  • Not considering the dress style or fabric when taking the measurement

It’s important to note that dress size and length charts can provide a general idea of where the hemline should fall, but measuring for alterations may be necessary for a perfect fit. When measuring, it’s crucial to consider the dress style, fabric, and personal preference for the length. Hemming or tailoring may also be necessary to achieve the desired size.

A fascinating dress hemming and alterations history date back to ancient Greece and Rome, where togas were measured and tailored to fit perfectly. Today, dress alterations are critical in achieving the perfect fit for any occasion.

FAQs: Answering Common Questions About Hollow-to-Hem Measurements

Faqs: Answering Common Questions About Hollow To Hem Measurements - How To Measure Hollow To Hem?,

Photo Credits: by Nicholas Lopez

Five Facts About Measuring Hollow to Hem:

  • ✅ Hollow to hem is a measurement used primarily in the clothing industry to determine the length of a dress or skirt. (Source: Azazie)
  • ✅ The measurement is taken from the depression at the base of the neck to the hemline of the dress or skirt. (Source: Brideside)
  • ✅ It is essential to have accurate hollow-to-hem measurements to ensure the dress or skirt fits appropriately. (Source:
  • ✅ Hollow to hem measurements should be taken while wearing the proper undergarments and shoes for the dress or skirt. (Source: JJ’s House)
  • ✅ When purchasing a dress or skirt, check the sizing chart and compare your hollow to hem measurement to ensure the correct size is selected. (Source: Ever-Pretty)

FAQs about Measuring Hollow To Hem

How to Measure Hollow to Hem?

When buying a dress, knowing how to measure hollow to hem can be crucial since it helps determine the dress’s length. Here’s how to do it:

Why is Measuring Hollow to Hem Important?

Measuring hollow to hem is essential because it helps to ensure that the dress is the correct length for the person wearing it. A dress that’s too long or short can be uncomfortable and unflattering.

What is the “Hollow to Hem” Measurement?

Hollow to hem is the measurement from the base of the neck (the hollow) to the hem of the skirt. This measurement is often used to determine the proper length of a dress.

What Tools Are Needed to Measure Hollow to Hem?

You’ll need a measuring tape and someone to measure hollow to hem. You may also want a pencil and paper handy to write down the measurement.

How Do You Find the “Hollow” of Your Neckline?

To find the hollow of your neckline, locate the dip at the base of your neck where your collarbones meet. This is where you’ll place the beginning of the measuring tape.

What Should You Wear When Measuring Hollow to Hem?

Wear shoes with a similar heel height to what you plan to wear with the dress. This will help ensure that the dress is the correct length for you. Wear form-fitting clothes or undergarments to get the most accurate measurement.

You May Also Like
Read More

How Long Is A Meter?

Table of Contents Show Key Takeaway:Origin and Definition of MeterStandards of Measurement for MeterInternational System of UnitsHistorical Definitions…
Read More